{"title":"Pixel Prop Expansion Packs","description":"\u003cp\u003eExpand your layout by adding new props on to existing controllers! The prop packages on this page do not include controllers, leaving you free to choose the pixel controller size that works best for your display, or use a pixel controller you already own. Modification to any \u003ca href=\"https:\/\/store.lightorama.com\/pages\/shop-for-sequences\"\u003estore bought sequences\u003c\/a\u003e will be likely required when purchasing an Expansion Pack instead of a CPC Package.\u003c\/p\u003e\n\u003cp\u003eTake advantage of Double Unit ID mode for Pixie controllers in \u003ca href=\"https:\/\/store.lightorama.com\/pages\/controller-firmware-updates#pixie\"\u003efirmware version\u003c\/a\u003e 1.11+, expanding to up to 340 pixels per port. Note that \u003ca href=\"https:\/\/store.lightorama.com\/pages\/pixel-extension-limits\"\u003ebrightness and extension distance\u003c\/a\u003e need to be altered when connecting multiple props per port.\u003c\/p\u003e","products":[{"product_id":"prop-package-no-controller-4-snowflakes","title":"Prop Package (No Controller) - 4 Snowflakes","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eProp packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. \u003cstrong\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"\/pages\/sequence-layouts\" data-mce-href=\"\/pages\/sequence-layouts\"\u003eRGBPlus sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\"}' data-sheets-userformat='{\"2\":515,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"12\":0}'\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Coro Snowflakes (2 styles - 2 of each) - 48 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eApprox. 24\" in diameter\u003c\/li\u003e\n\u003cli\u003e10mm White Coro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e4 Strands of White Bullet Pixels - 50 Ct (4\" spacing) - LOR style connectors\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (No controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/rgb-packages\" data-mce-href=\"\/collections\/rgb-packages\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. When viewing the snowflake from the back, the arm with the Pixel Path \"star\" (for \"start\") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the \"square\" (for \"stop\").\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen arranging the four snowflakes, the first snowflake should be on the left of a horizontal row, or the top of a vertical row. \u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the snowflake from the back, the arm with the Pixel Path \"star\" (for \"start\") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the \"square\" (for \"stop\").\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e19, 1A, 1B and 1C,\u003c\/strong\u003e\u003c\/span\u003e both physically on your Pixie controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg height=\"126\" width=\"252\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43046488539381,"sku":"CPnoctrl-Snowflake4|CoroFlake|12V-Bullet-4in-White-50-LOR","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/products\/Snowflakeset_5342cff0-a963-4039-b505-ff044c595e29.png?v=1659108924"},{"product_id":"prop-package-4-spinners","title":"Prop Package (No Controller) - 4 Spinners","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. The props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"\/pages\/sequence-layouts\" data-mce-href=\"\/pages\/sequence-layouts\"\u003eRGBPlus sequences.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Coro Spinners - 100 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eApprox. 22\" in diameter\u003c\/li\u003e\n\u003cli\u003e10mm White Coro with Red Stripes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e8 Strands of White Bullet Pixels - 50 Ct (4\" spacing). Two strands of 50 should be connected together per prop. LOR style connectors.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/smart-rgb-cpc-kits-coro-pixels-controller\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. When viewing the spinner from the back, the spoke with the Pixel Path \"star\" (for \"start\") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the \"square\" (for \"stop\").\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSpinners should be arranged with spinner 1 on the left if the spinners are in a horizontal stack, or spinner 1 should be on the top of a vertical stack. \u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the spinner from the back, the spoke with the Pixel Path \"star\" (for \"start\") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the \"square\" (for \"stop\").\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1D, 1E, 1F and 20,\u003c\/strong\u003e\u003c\/span\u003e both physically on your Pixie controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg height=\"131\" width=\"262\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43046533464309,"sku":"CPnoctrl-Spinner4|CoroSpinner|12V-Bullet-4in-White-50-LOR","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/products\/SpinnerSet_65a1912a-f10e-41ed-8e2f-192f79f35978.png?v=1659109515"},{"product_id":"prop-package-no-controller-4-candy-canes","title":"Prop Package (No Controller) - 4 Candy Canes","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. \u003cstrong\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"\/pages\/sequence-layouts\" data-mce-href=\"\/pages\/sequence-layouts\"\u003eRGBPlus sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Coro Candy Canes - 48 Nodes Each. Select Right Facing or Left Facing. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eApprox. 36\" tall\u003c\/li\u003e\n\u003cli\u003e10mm White Coro with Red Stripes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e4 Strands of White Bullet Pixels - 50 Ct (4\" spacing) - LOR style connectors\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (no controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/rgb-packages\" data-mce-href=\"\/collections\/rgb-packages\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. When viewing the candy cane from the back, the Pixel Path \"star\" (for \"start\") should be at the bottom of the prop on the outer side of the candy cane, with the pixel path continuing until it reaches the \"square\" (for \"stop\") on the bottom inside of the prop.\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen viewing the candy canes as the audience, the first of the four candy canes should be on the left of a horizontal row or the front of a vertical row. \u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the candy cane from the back, the Pixel Path \"star\" (for \"start\") should be at the bottom of the prop on the outer side of the candy cane, with the pixel path continuing until it reaches the \"square\" (for \"stop\") on the bottom inside of the prop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e21, 22, 23 and 24,\u003c\/strong\u003e\u003c\/span\u003e both physically on your controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" width=\"272\" height=\"136\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"4 Left","offer_id":45356479512821,"sku":"CPnoctrl-CandyCane4|CoroCaneLeft|12V-Bullet-4in-White-50-LOR","price":139.95,"currency_code":"USD","in_stock":true},{"title":"4 Right","offer_id":45356479545589,"sku":"CPnoctrl-CandyCane4|CoroCaneRight|12V-Bullet-4in-White-50-LOR","price":139.95,"currency_code":"USD","in_stock":true},{"title":"2 Left\/2 Right","offer_id":45356479578357,"sku":"CPnoctrl-CandyCane4|CoroCaneLeft|CoroCaneRight|12V-Bullet-4in-White-50-LOR","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/products\/CandyCanes_261753c8-1464-4ae0-832f-03251f02318b.png?v=1659116899"},{"product_id":"prop-package-no-controller-40-pixel-stakes","title":"Prop Package (No Controller) - 40 Pixel Stakes","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. \u003cstrong\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"\/pages\/sequence-layouts\"\u003eRGBPlus sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e40 Pixel Stakes - 5 Nodes Each. Used to create 4 rows of 10 pixel stakes each.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e12\" tall with 1.5\" node spacing\u003c\/li\u003e\n\u003cli\u003e10mm Black Coro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e4 Strands of Black Bullet Pixels - 50 Ct (5 node sections - 3 feet of spacing between each set of 5 nodes.). LOR style connectors.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (No controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/smart-rgb-cpc-kits-coro-pixels-controller\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. The first node of each set of 5 pixels should start at the bottom of the pixel stake, and the 5th node should end at the top.\u003c\/p\u003e\n\u003cp\u003eWhen creating your 4 rows of 10 pixel stakes, the first stake in each group of 10 should be on the left side of the row when viewing from the audience vantage point. Row 1 should be closest to your audience, and Row 4 should be farthest from your audience.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdding more than 40 Pixel Stakes in your display:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cspan style=\"color: #000000;\"\u003eOur default RGBPlus sequences have effects for 40 Pixel stakes.\u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e If you do not want to edit the preview\/sequences and would prefer that everything just work 'out of the box,'\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eDO NOT order more than one set of 40 pixel stakes with a controller.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eIf you feel comfortable modifying your custom preview or a copy of the RGBPlus preview (we do not recommend editing the default), you can download one of these prop files and import it instead of the default CPC Pixel Stake Package from the Light-O-Rama Props online menu, then use \"Assign Different Preview\" to map the RGBPlus sequence to your preview with additional stakes. We do not recommend connecting more than 20 stakes (100 pixels) per pixie port due to the extended wire length of the special pixels made for these stakes - you may see voltage drop if you connect more than 100 pixels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Group-RGB_Pixel_Stakes_All-80.lpeprop?v=1667159450\"\u003e80 Pixel Stakes\u003c\/a\u003e - 20 stakes \u003cspan data-mce-fragment=\"1\"\u003e(100 pixels)\u003c\/span\u003e per controller port. 4 ports of a Pixie used in total.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Group-RGB_Pixel_Stakes_All-120.lpeprop?v=1667159450\"\u003e120 Pixel Stakes\u003c\/a\u003e - 20 stakes (100 pixels) per controller port (4 needed) on PixieA. 10 stakes \u003cspan data-mce-fragment=\"1\"\u003e(50 pixels)\u003c\/span\u003e per controller port (4 needed) on PixieB. Default settings for PixieB have the Unit IDs set at 50, 51, 52, and 52 on Aux A. You can change these Unit IDs to a different set of four consecutive numbers if needed. 8 Pixie ports are used in total.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Group-RGB_Pixel_Stakes_All-160.lpeprop?v=1667159450\"\u003e160 Pixel Stakes\u003c\/a\u003e - 20 stakes (100 pixels) per controller port (4 needed) on PixieA. 20 stakes (100 pixels) per controller port (4 needed) on PixieB. Default settings for PixieB have the Unit IDs set at 50, 51, 52, and 52 on Aux A. You can change these Unit IDs to a different set of four consecutive numbers if needed. 8 Pixie ports are used in total.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/G4dOosGBWtY\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences (Available October 2022), the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe first node of each set of 5 pixels should start at the bottom of the pixel stake, and the 5th node should end at the top.\u003c\/p\u003e\n\u003cp\u003eWhen creating your 4 rows of 10 pixel stakes, the first stake in each group of 10 should be on the left side of the row when viewing from the audience vantage point. Row 1 should be closest to your audience, and Row 4 should be farthest from your audience.\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e15, 16, 17 and 18,\u003c\/strong\u003e\u003c\/span\u003e both physically on your controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" width=\"298\" height=\"149\"\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43047034683637,"sku":"CPnoctrl-PixelStake40|CoroPixelStake|12V-PixStake-Bullet-Black-50-LOR","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/products\/PixelStakes_26905066-9573-4d57-9dcc-e45945bf73b9.png?v=1659117422"},{"product_id":"prop-package-no-controller-8-mini-arches","title":"Prop Package (No Controller) - 8 Mini Arches","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. \u003cstrong\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"\/pages\/sequence-layouts\"\u003eRGBPlus sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 Mini Arches - 25 Nodes Each\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e2' 11.5\" long by 1' 8.75\" high. Lighted length 35\". Nodes at 2.125\" spacing.\u003c\/li\u003e\n\u003cli\u003e10mm Black Coro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e8 Strands of Black Bullet Pixels - 25 Ct (4\" spacing). Two arches should be connected together per Pixie port. LOR style connectors.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (No controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/smart-rgb-cpc-kits-coro-pixels-controller\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #7800fc;\"\u003eWant larger arches? (4x50) Just add a\u003cspan\u003e \u003c\/span\u003e\u003ca style=\"color: #7800fc;\" href=\"https:\/\/store.lightorama.com\/collections\/rgb-packages\/products\/pixie-4-bundle\" data-mce-href=\"https:\/\/store.lightorama.com\/collections\/rgb-packages\/products\/pixie-4-bundle\"\u003ePixie4 Package with 4 strands of 50 pixels\u003c\/a\u003e to your cart and build whatever size arch frame best suits your needs. RGBPlus sequences are designed to work with either 8x25 arches (this package) or 4x50 arches (of your own custom size).\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. When viewing the arch from the back, the first pixel should be on the right and the 25th pixel should end on the left. If viewing the prop from the front (no visible wires), the first pixel of each arch should start on the left.\u003c\/p\u003e\n\u003cp\u003eWhen viewing the display as the audience, the first of the 8 arches should be on the left and the last arch should be on the right.\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences (Available October 2022), the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen viewing the arch from the back, the first pixel should be on the right and the 25th pixel should end on the left. If viewing the prop from the front (no visible wires), the first pixel of each arch should start on the left. When viewing the display as the audience, the first of the 8 arches should be on the left and the last arch should be on the right.\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e11, 12, 13 and 14,\u003c\/strong\u003e\u003c\/span\u003e both physically on your controller and in your Preview. Two, 25 node, arches should be connected per port for a total of 50 pixels connected per port. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" width=\"252\" height=\"126\"\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43047060406517,"sku":"CPnoctrl-MiniArch8|CoroArch25|12V-MiniArch-Bullet-Black-25-LOR","price":284.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/products\/MiniArches_2b18b5cd-2dc0-4687-afae-1d7498b23103.png?v=1659118151"},{"product_id":"prop-package-no-controller-8-mini-trees","title":"Prop Package (No Controller) - 8 Mini Trees","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show.  \u003cstrong data-mce-fragment=\"1\"\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca data-mce-fragment=\"1\" href=\"\/pages\/sequence-layouts\" data-mce-href=\"\/pages\/sequence-layouts\"\u003eRGBPlus sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":515,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\"}' data-sheets-root=\"1\"\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 Mini Trees - 100 Nodes Each. 80 Nodes for Tree and 20 Nodes for Star. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e46\" high by 17.5\" wide\u003c\/li\u003e\n\u003cli\u003e10mm Green Coro with additional Yellow Coro for Star\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e16 Strands of Black Bullet Pixels - 50 Ct (4\" spacing) - LOR style connectors. Two strands of 50 should be connected together per prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (No controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\" data-mce-href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca data-mce-fragment=\"1\" href=\"\/collections\/rgb-packages\" data-mce-href=\"\/collections\/rgb-packages\"\u003eCPC Kit \u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. When viewing the Mini Tree from the back, the Pixel Path \"star\" (for \"start\") should be at the bottom right of the prop, with the pixel path continuing up and down the tree until it continues into the star and reaches the \"square\" for \"stop.\"\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen viewing the mini trees as the audience, the 1st tree should be on the left in a row and the 8th tree should be on the right. \u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the Mini Tree from the back, the Pixel Path \"star\" (for \"start\") should be at the bottom right of the prop, with the pixel path continuing up and down the tree until it continues into the star and reaches the \"square\" for \"stop.\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e09, 0A, 0B, 0C, 0D, 0E, 0F, and 10,\u003c\/strong\u003e\u003c\/span\u003e both physically on your controller and in your Preview. Learn how to set the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\" data-mce-href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\" data-mce-href=\"\/pages\/sequence-layouts\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg height=\"124\" width=\"248\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\"\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43047164379381,"sku":"CPnoctrl-MiniTree8|CoroMiniTreewStar|12V-Bullet-4in-Black-50-LOR","price":539.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/products\/MiniTrees_d1e8f093-ea71-4b9f-82c4-db83d2d6d310.png?v=1659119704"},{"product_id":"prop-package-no-controller-20x40-matrix","title":"Prop Package (No Controller) - 20x40 Matrix","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. \u003cstrong data-mce-fragment=\"1\"\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca data-mce-fragment=\"1\" href=\"\/pages\/sequence-layouts\"\u003eRGBPlus sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Sheet of Matrix Mesh (Black or White) - 800 Pixels (20hx40w)\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eApprox. 4' by 8' (46\" by 92\")\u003c\/li\u003e\n\u003cli\u003e2.3\" spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e16 Strands of Black Square or LumaDome Pixels - 50 Ct (4\" spacing). Two strands should be connected to form strands of 100, connected to 8 total Pixie outputs. LOR style connectors.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs dangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMounting surface for stabilization\/straightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (No controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca data-mce-fragment=\"1\" href=\"\/collections\/rgb-packages\"\u003eCPC Kit \u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eWhen viewing the Matrix Mesh from the back, the first pixel of the first port should begin on the bottom right and continue UP the section of 20 nodes. When viewing as the audience, the first pixel should be on the bottom left. Each strand of 100 should fold in a vertical pattern to create 5 columns in the matrix. The strands of 100 should start at the bottom of columns 1, 6, 11, 16, 21, 26, 31, and 36. Horizontally pushed strands (80 long, remainder 20), are NOT useable with standard Matrix Shapes in the S5 Sequencer\/Preview Editor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/CPCmatrixWiring_480x480.png?v=1668445098\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences (Available October 2022), the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxB network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 3\u003c\/strong\u003e\u003c\/span\u003e of your N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWhen viewing the Matrix Mesh from the back, the first pixel of the first port should begin on the bottom right and continue UP the section of 20 nodes. When viewing as the audience, the first pixel should be on the bottom left. Each strand of 100 should fold in a vertical pattern to create 5 columns in the matrix. The strands of 100 should start at the bottom of columns 1, 6, 11, 16, 21, 26, 31, and 36. Horizontally pushed strands (80 long, remainder 20), are NOT useable with standard Matrix Shapes in the S5 Sequencer\/Preview Editor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e90, 91, 92, 93, 94, 95, 96, 97,\u003c\/strong\u003e\u003c\/span\u003e both physically on your controller and in your Preview. Learn how to set the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using a matrix with our RGBPlus Sequences and altering networks\/Unit IDs or the dimensions of the matrix by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" width=\"278\" height=\"139\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Black \/ Square 4\" LOR - Black","offer_id":43047174799605,"sku":"CPnoctrl-Matrix20x40|MatrixMeshBlack20x40|12V-Square-Black-50-LOR","price":419.95,"currency_code":"USD","in_stock":false},{"title":"Black \/ LumaDome 4\" LOR - Black","offer_id":47117089636597,"sku":"CPnoctrl-Matrix20x40|MatrixMeshBlack20x40|12V-LumaDome-Black-50-LOR","price":369.95,"currency_code":"USD","in_stock":true},{"title":"White \/ Square 4\" LOR - Black","offer_id":43120972857589,"sku":"CPnoctrl-Matrix20x40|MatrixMeshWhite20x40|12V-Square-Black-50-LOR","price":419.95,"currency_code":"USD","in_stock":true},{"title":"White \/ LumaDome 4\" LOR - Black","offer_id":47117089669365,"sku":"CPnoctrl-Matrix20x40|MatrixMeshWhite20x40|12V-LumaDome-Black-50-LOR","price":369.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/products\/BlackMatrixMesh_d9bdbed7-74ab-47b9-bd04-44b8836a6315.png?v=1659120003"},{"product_id":"prop-package-no-controller-4-bats","title":"Prop Package (No Controller) Halloween - 4 Bats","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eProp packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. \u003cstrong\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca data-mce-fragment=\"1\" href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\" data-mce-href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\"\u003eRGBPlus Halloween sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Coro Bats - 50 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e34\" width x 11\" height\u003c\/li\u003e\n\u003cli\u003e10mm Black Coro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e4 Strands of Black Bullet Pixels - 50 Ct (4\" spacing). LOR Style connectors.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (No controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/rgb-packages\" data-mce-href=\"\/collections\/rgb-packages\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen viewing the bat from the back, the Pixel Path \"star\" (for \"start\") should be at the top in the face, with the pixel path continuing in a counterclockwise fashion until it reaches the \"square\" (for \"stop\").\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences (Available October 2022), the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ebat\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e from the back, the Pixel Path \"star\" (for \"start\") should be \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eat the top in the face\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e, with the pixel path continuing in a counterclockwise fashion until it reaches the \"square\" (for \"stop\").\u003c\/span\u003e\u003cspan\u003e Bat \"1\" should be on the left of a horizontal row or on the top of a vertical row of bats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e19, 1A, 1B and 1C,\u003c\/strong\u003e\u003c\/span\u003e both physically on your Pixie controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg height=\"130\" width=\"260\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43905124892917,"sku":"CPnoctrl-Bat4|CoroBat|12V-Bullet-4in-Black-50-LOR","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Bats_f1cb2040-7858-41e9-9655-3a1c955fdb64.png?v=1750102987"},{"product_id":"prop-package-no-controller-4-ghosts","title":"Prop Package (No Controller) Halloween - 4 Ghosts","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. \u003cstrong\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\"\u003eRGBPlus Halloween sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\"}' data-sheets-userformat='{\"2\":515,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"12\":0}'\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Coro Ghost - 2 Big and 2 Small - 100 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eBig Ghosts (2) - 37\" tall x 23.5\" wide\u003c\/li\u003e\n\u003cli\u003eSmall Ghosts (2) - \u003cspan data-mce-fragment=\"1\"\u003e30\" tall x 23.5\" wide\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e10mm White Coro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e8 Strands of White Bullet Pixels - 50 Ct (4\" spacing) - To make 4 sets of 100. LOR Style connectors.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (no controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/rgb-packages\" data-mce-href=\"\/collections\/rgb-packages\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. \u003c\/p\u003e\n\u003cp\u003eWhen viewing the ghosts from the back, the Pixel Path \"star\" (for \"start\") should be at near the bottom left of the prop, with the pixel path continuing clockwise until it reaches the \"square\" (for \"stop\") on the bottom of the prop.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe ghosts are interchangeable in size - any size ghost can be plugged into any port of your Pixie4 Controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen viewing the ghosts as the audience, the first of the four ghosts should be on the left of a horizontal row or the front of a vertical row. The ghosts are interchangeable in size - any size ghost can be plugged into any port of your Pixie4. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eghosts\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e from the back, the Pixel Path \"star\" (for \"start\") should be at near the bottom left of the prop, with the pixel path continuing clockwise until it reaches the \"square\" (for \"stop\") on the bottom of the prop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e21, 22, 23 and 24,\u003c\/strong\u003e\u003c\/span\u003e both physically on your controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" width=\"272\" height=\"136\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43905173815541,"sku":"CPnoctrl-Ghost4|CoroGhost|12V-Bullet-4in-White-50-LOR","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Ghosts_4310c516-fc21-4c74-bda3-a2b7e596092b.png?v=1687446202"},{"product_id":"prop-package-no-controller-4-spiders","title":"Prop Package (No Controller) Halloween - 4 Spiders","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show. The props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\" data-mce-href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\"\u003e\u003cstrong\u003eRGBPlus Halloween sequences.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\"}' data-sheets-userformat='{\"2\":515,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"12\":0}'\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 Coro Spiders - 100 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eApprox. 23\" in diameter\u003c\/li\u003e\n\u003cli\u003e10mm Black Coro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cli\u003e8 Strands of Black Bullet Pixels - 50 Ct (4\" spacing). \u003cspan data-mce-fragment=\"1\"\u003eTwo strands of 50 should be connected together per prop. LOR Style connectors.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\" data-mce-href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/smart-rgb-cpc-kits-coro-pixels-controller\" data-mce-href=\"\/collections\/smart-rgb-cpc-kits-coro-pixels-controller\"\u003eCPC Kit\u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen viewing the spider from the back, the Pixel Path \"star\" (for \"start\") should be near the center of the spider, with the pixel path continuing in a counterclockwise fashion around the body and legs until it reaches the \"square\" (for \"stop\").\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the spider from the back, the Pixel Path \"star\" (for \"start\") should be near the center of the spider, with the pixel path continuing in a counterclockwise fashion around the body and legs until it reaches the \"square\" (for \"stop\").\u003c\/span\u003e\u003cspan\u003e Spider \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"1\" should be on the left of a horizontal row or on the top of a vertical row of spiders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1D, 1E, 1F and 20,\u003c\/strong\u003e\u003c\/span\u003e both physically on your Pixie controller and in your Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\" data-mce-href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" data-mce-href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" width=\"262\" height=\"131\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43905174733045,"sku":"CPnoctrl-Spider4|CoroSpider|12V-Bullet-4in-Black-50-LOR","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Spiders_5710df5b-fa4b-4911-9adc-362fcc4b283e.png?v=1687446235"},{"product_id":"prop-package-no-controller-8-tombstones","title":"Prop Package (No Controller) Halloween - 8 Tombstones","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eOur Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer\/showtime director if it is the only Unit in the show.  \u003cstrong data-mce-fragment=\"1\"\u003eThe props in this package must be assigned to specific Unit IDs in order to work with our \u003ca href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/store.lightorama.com\/collections\/sequences-halloween\"\u003eRGBPlus Halloween sequences.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\"}' data-sheets-userformat='{\"2\":515,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"12\":0}'\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this Package:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 RIP Tombstones - 100 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e31\" tall by 19\" wide\u003c\/li\u003e\n\u003cli\u003e10mm Black Coro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e16 Strands of Black Bullet Pixels - 50 Ct (4\" spacing). Two strands of 50 should be connected together per prop. LOR Style connectors.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangles not included. The controller you use needs\u003cspan\u003e \u003c\/span\u003edangles installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixel Extensions\u003c\/li\u003e\n\u003cli\u003eMounting material for home attachment\u003c\/li\u003e\n\u003cli\u003eMetal stakes or other ground mounting material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Prop Packages (No controller) can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. If you're looking for a package with the controller included, consider purchasing a \u003ca href=\"\/collections\/rgb-packages\" data-mce-fragment=\"1\" data-mce-href=\"\/collections\/rgb-packages\"\u003eCPC Kit \u003c\/a\u003e (Coro, Pixels, Controller) instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. \u003c\/p\u003e\n\u003cp\u003eWhen viewing the Tombstone from the back, the Pixel Path \"star\" (for \"start\") should be on the bottom right of the prop, with the pixel path continuing up and around the tombstone until it continues into the star and reaches the \"square\" for \"stop.\"\u003c\/p\u003e\n\u003ch6\u003eRGBPlus Sequences\u003c\/h6\u003e\n\u003cp\u003eTo use this Prop Package with our RGBPlus Sequences, the Pixie controller you use must be connected to the \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAuxA network\u003c\/strong\u003e \u003c\/span\u003e on your computer or \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNet 2\u003c\/strong\u003e\u003c\/span\u003e of your N2-G4 or N4-G4 Showtime Director. \u003cspan data-mce-fragment=\"1\"\u003eThe Pro license level is required to play RGBPlus sequences. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe software version required is listed on each RGBPlus sequence purchase page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen viewing the tombstones as the audience, the 1st tree should be on the left in a row and the 8th tree should be on the right. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen viewing the \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eTombstone\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e from the back, the Pixel Path \"star\" (for \"start\") should be \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eon\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e the bottom right of the prop, with the pixel path continuing up and \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003earound the tombstone\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e until it continues into the star and reaches the \"square\" for \"stop.\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe props in this package must be connected to Unit IDs \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e09, 0A, 0B, 0C, 0D, 0E, 0F, and 10,\u003c\/strong\u003e\u003c\/span\u003e both physically on your controller and in your Preview. Learn how to set the Unit ID of your Pixie controller using DIP switches by \u003ca href=\"\/pages\/dip-switch-settings\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30Day1YearWarranty_6783afe7-2292-4525-b42f-8759c744e8a4_480x480.png?v=1686245620\" width=\"248\" height=\"124\"\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Default Title","offer_id":43905182564597,"sku":"CPnoctrl-Tombstone8|CoroTombstone|12V-Bullet-4in-Black-50-LOR","price":569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Tombstones_4a553fb3-553c-4f4e-9afd-9884ad4d71a3.png?v=1687447365"},{"product_id":"singing-christmas-tree-4-character-bundle","title":"Singing RGB Christmas Trees - 4 Character Bundle","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003e\u003cbig\u003e\u003cbig\u003e\u003cspan\u003eThe Singing Trees - Elden, Felix, Ralphie, Zuzu\u003c\/span\u003e\u003c\/big\u003e\u003c\/big\u003e\u003c\/p\u003e\n\u003cp\u003eThe standard package includes four singing tree characters with a Pixie8 controller, 16 sets of 50 black square pixels (LOR connectors), and 8 extensions (four 5ft and four 10ft). \u003c\/p\u003e\n\u003cp\u003ePixel pushing is completed by the customer, following provided diagrams and the path on the back of the singing faces. This package may be purchased without a Pixie8 controller if you \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Singing_Face_Character_Instructions.pdf?v=1730747882\" rel=\"noopener\" target=\"_blank\"\u003ealready own a Pixie you can use\u003c\/a\u003e, such as from your Singing Pumpkin package purchase.\u003c\/p\u003e\n\u003cp\u003eThe Assembled Pixie8 controller includes the controller board and power supply wired and mounted in a weather-proof, ventilated and UL listed enclosure. \u003cspan data-teams=\"true\"\u003eThe power supply is UL listed: MeanWell LRS-350-12 - 120\/240V input (User Selectable) - 12V - 29A output - with extended temperature operating range.\u003c\/span\u003e This is a 12 Volt controller system compatible with 12V RGB smart pixel strands and devices. Dumb RGB devices or standard LED \/ Incandescent lights cannot be plugged into the ports of this controller.\u003c\/p\u003e\n\u003cp\u003eIf you do not use a Pixie controller included with this package, you must set the \"personalities\" of your Singing Trees in your own Pixie using the Control Panel\u0026gt;Hardware Utility\u0026gt;Advanced Configuration. A Tree personality takes up two ports, and can be configured in the dropdown fields.\u003c\/p\u003e\n\u003cp\u003eFrames are not included and must be built by the customer. Each character uses 190-200 smart pixels based on two 100 square pixel strings. Pixel spacing is 1-2″ depending on location.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eFRAMES NOT INCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/youtu.be\/9Ii0ns0xDk0\" style=\"color: rgb(43, 0, 255);\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eSee DIY Frame Build Option Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElden - Ports 1 \u0026amp; 2\u003c\/li\u003e\n\u003cli\u003eFelix - Ports 3 \u0026amp; 4\u003c\/li\u003e\n\u003cli\u003eRalphie - Ports 5 \u0026amp; 6\u003c\/li\u003e\n\u003cli\u003eZuzu - Ports 7 \u0026amp; 8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eDimensions per character (for frame building): 42\"h by 39\"w\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/ReadMeFirst-Singing_Face_Set_Up_Instructions.pdf?v=1671466551\" target=\"_blank\"\u003eRead more about set up instructions for your face by clicking here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis singing face character bundle standard package is controlled by an outdoor rated, weatherproof Pixie8 controller with built-in power supply. Just connect the Pixie8 to your existing standard Light-O-Rama data network with a Cat5, tweak your musical sequences to add in these talking\/singing characters (\u003ca href=\"https:\/\/store.lightorama.com\/collections\/sequences-singing-faces\"\u003eor buy our pre-made sequences\u003c\/a\u003e) and you’re good to go. \u003c\/p\u003e\n\u003cp\u003eThese characters can be controlled using a standard PC set up (with a USB485 adapter) or with any of our \u003ca href=\"https:\/\/store.lightorama.com\/collections\/showtime-directors-and-sd-cards\"\u003eShowtime Directors.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eIf you are using these Singing Faces with any Deluxe, RGBPlus, or Singing Face Standalone sequences purchased from our sequence store, they should be connected to your “Regular” computer network or “Net 1” Showtime Director network.\u003c\/p\u003e\n\u003cp\u003ePurchases outside the United States and Canada are assembled with an internationally approved and \u003cspan data-teams=\"true\"\u003eUL listed: MeanWell RSP-320-12 - 120\/240V input - 12V - 26.7A output - with Power Factor Correction and extended temperature operating range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cstrong\u003eSoftware is not included.\u003c\/strong\u003e\u003c\/span\u003e The \u003cstrong\u003eAdvanced Version\u003c\/strong\u003e of the Light-O-Rama Software Suite v5.3.0+ is required to use \u003ca href=\"https:\/\/store.lightorama.com\/collections\/sequences-singing-faces\"\u003eStandalone singing face sequences from our store.\u003c\/a\u003e The \u003cstrong\u003ePro Version\u003c\/strong\u003e of the Light-O-Rama Software Suite is required to use other props in RGBPlus sequences.\u003c\/p\u003e\n\u003ch6\u003eMouth Movements\u003c\/h6\u003e\n\u003cp\u003eFour different singing tree characters are available for you to use altogether as a set or mix and match as you see fit. (Elden, Felix, Ralphie and Zuzu).\u003c\/p\u003e\n\u003cp\u003eEach singing face is on a sheet of outdoor rated, UV stabilized, black plastic that is 42 inches tall by 39 inches wide. A singing character has fourteen circuits of RGB control: body outline, star or bow, two eye movements and ten mouth movements. Our V1 faces contained the first eight items in this list (stopping after the ‘O or U’ mouth position).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003echaracter outline\u003c\/li\u003e\n\u003cli\u003estar\/bow on top\u003c\/li\u003e\n\u003cli\u003eeyes closed\u003c\/li\u003e\n\u003cli\u003eeyes open\u003c\/li\u003e\n\u003cli\u003emouth closed\u003c\/li\u003e\n\u003cli\u003emouth E (half open)\u003c\/li\u003e\n\u003cli\u003emouth A or I (full open)\u003c\/li\u003e\n\u003cli\u003emouth O or U\u003c\/li\u003e\n\u003cli\u003emouth Ah\u003c\/li\u003e\n\u003cli\u003emouth M, B or P\u003c\/li\u003e\n\u003cli\u003emouth F or V\u003c\/li\u003e\n\u003cli\u003emouth L\u003c\/li\u003e\n\u003cli\u003emouth W or Q\u003c\/li\u003e\n\u003cli\u003emouth etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEXAMPLE - ZUZU\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Zuzu10MouthCollage_480x480.jpg?v=1664566672\"\u003e\u003c\/p\u003e\n\u003cp\u003eRGB pixels are used in our singing faces so a section can be any color, making it useful when expressing moods during a song.  The lips might change colors or the eyes could flash from green to blue when appropriate.\u003c\/p\u003e\n\u003cp\u003eWhen sent with a singing face, our Pixie8 controllers are configured to make each of these fourteen sections act like dumb RGB pixels on each of the four faces. This way, adding a singing face to your network only takes up “14 dumb pixels” instead of the full “200 smart pixels” actually used to create this face. This makes sequencing easier for you and saves you network space at the same time. You do not need to do anything special to your Pixie8 controller for this to happen – it has already been done for you at our warehouse. Do NOT reset your controller without instruction from the Light-O-Rama Help Desk.\u003c\/p\u003e\n\u003ch6\u003eModes\u003c\/h6\u003e\n\u003ch4\u003e\u003cstrong\u003ePersonality Mode - Default\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSinging Face controllers are shipped already configured for personality mode. Using the Hardware Utility, two ports of the Pixie controller have been assigned to the respective character. It is important to connect the ports to the right character as pixel placement is different for each character - they are not interchangeable.\u003c\/p\u003e\n\u003cp\u003eFirmware settings allow personality mode to treat a singing character as 14 pixels on your network instead of the full 200 pixel nodes used. (14 sections - 10 Mouth, 2 Eyes, Outline, Topper)\u003c\/p\u003e\n\u003cp\u003eThe personality of a singing face can be changed or removed by using a computer with Light-O-Rama software installed. Scan for the controller in the Hardware Utility, choose Config for your Pixie, and open the Advanced settings to find the dropdown.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCustom Mode\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eA custom model of V2 singing characters can be used if personality mode is disabled in the Hardware Utility. A custom model will use the full 200 pixels of data on your network instead of 14.\u003c\/p\u003e\n\u003cp\u003eUse a custom model to use your Pixie in Double Unit ID mode (firmware v1.11+ required), use an Aurora Core or Aurora Edge, or to use Motion Effects on any section of your character instead of solid colors. Custom models will NOT work automatically with Light-O-Rama store sequences (which use personality mode configured effects), and will not transfer with tags. Copy and paste is required to use effects from Store Sequences.\u003c\/p\u003e\n\u003cp\u003eClick the character name below to download the .lpeprop file to import into your preview. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_EldenV2-Custom_Shape.lpeprop?v=1777487582\" rel=\"noopener\" target=\"_blank\"\u003eElden Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_FelixV2-Custom_Shape.lpeprop?v=1777487581\" rel=\"noopener\" target=\"_blank\"\u003eFelix Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_RalphieV2-Custom_Shape.lpeprop?v=1777487582\" rel=\"noopener\" target=\"_blank\"\u003eRalphie Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_ZuzuV2-Custom_Shape.lpeprop?v=1777487581\" rel=\"noopener\" target=\"_blank\"\u003eZuzu Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_JackV2-Custom_Shape.lpeprop?v=1777487581\" rel=\"noopener\" target=\"_blank\"\u003eJack Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_GourdyV2-Custom_Shape.lpeprop?v=1777487580\" rel=\"noopener\" target=\"_blank\"\u003eGourdy Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_MaxV2-Custom_Shape.lpeprop?v=1777487580\" rel=\"noopener\" target=\"_blank\"\u003eMax Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_MunchkinV2-Custom_Shape.lpeprop?v=1777487582\" rel=\"noopener\" target=\"_blank\"\u003eMunchkin Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-23fbd0c1-7fff-500c-b402-3b5cc68d51d6\"\u003e\u003cspan\u003eLegacy Mode\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThis singing face can also be used in V1 Mode. Placing a singing face into V1 mode will allow it to work with any previously purchased Singing Face Motion Paks or custom sequences created for LOR V1 faces (before the 10-Mouth movement faces were available) without any sequence modification required.\u003c\/p\u003e\n\u003cp\u003eAll Light-O-Rama “Singing Face Standalone” or “RGBPlus” sequence you purchase will contain both the V1 and V2 version of this singing face character.\u003c\/p\u003e\n\u003cp\u003eTo use this singing face in “V1 Mode” (four mouth movements), place the included jumper on position 4 of the JP5 pin-header of your Pixie controller. JP5 is an 8-position pin-header: two rows of 4 pins with the label JP5 printed next to the first position of the pin-header. A jumper is small black plastic block with metal insert that slides over two pins in opposite rows of the pin-header. (Instructions with pictures will be sent with your purchase.)\u003c\/p\u003e\n\u003cp\u003eIf the jumper is removed and a sequence contains effects for both a V1 face and a V2 10-mouth face, the singing face will follow the 10-mouth face sequencing by default.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003ca title=\"Light-O-Rama Warranty\" href=\"https:\/\/store.lightorama.com\/pages\/warranties\"\u003eClick for more info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store.lightorama.com\/pages\/warranties\" title=\"Light-O-Rama Warranty\"\u003e\u003cimg height=\"200\" width=\"200\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30DayMoneyBack-RevA-1000x1000_480x480.png?\"\u003e\u003cimg height=\"200\" width=\"200\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/OneYearWarranty-RevB-1000x1000_480x480.png\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Pixie8 (LOR Black Dangles) \/ Customer Pushes Pixels \/ None","offer_id":45670321488117,"sku":"SingingTree-Elden|SingingTree-Felix|SingingTree-Ralphie|SingingTree-Zuzu|Pixie8-12V|Dangle-Black-LOR|12V-Square-Black-50-LOR|Ext-Black-5ft-LOR|Ext-Black-10ft-LOR|CustomerAssemble","price":899.95,"currency_code":"USD","in_stock":true},{"title":"Pixie8 (LOR Black Dangles) \/ Customer Pushes Pixels \/ 50ft","offer_id":47206024708341,"sku":"SingingTree-Elden|SingingTree-Felix|SingingTree-Ralphie|SingingTree-Zuzu|Pixie8-12V|Dangle-Black-LOR|12V-Square-Black-50-LOR|Ext-Black-5ft-LOR|Ext-Black-10ft-LOR|Cat-5E50ft|CustomerAssemble","price":914.95,"currency_code":"USD","in_stock":true},{"title":"Purchase Controller Separately \/ Customer Pushes Pixels \/ None","offer_id":45778757222645,"sku":"SingingTree-Elden|SingingTree-Felix|SingingTree-Ralphie|SingingTree-Zuzu|12V-Square-Black-50-LOR|Ext-Black-5ft-LOR|Ext-Black-10ft-LOR|CustomerAssemble","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Tree_4.png?v=1720470091"},{"product_id":"prop-package-no-controller-18-star-topper-for-pixel-tree","title":"Prop Package (No Controller) - 18\" Star Topper for Pixel Tree","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003eWhat can your display look like with our CPC and Prop Packages? Take a look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GeCQ-u0LCSw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAdd this 18\" star to your existing 6'6\" Light-O-Rama pixel tree or other small tree of your own design (less than 10ft tall) on the Regular Network\/Network 1. This star is designed to add on to pixel trees less than 10ft tall where the pixel strand's pixels end at either the BASE or TOP of the pixel tree.  \u003c\/p\u003e\n\u003cp\u003eTo use this star with an existing 16x25 Pixel tree, you must use the Hardware Utility on the computer to change your Pixie8's setting to allow 100 pixels per port instead of the default 50 pixels or else your star will not light. \u003ca href=\"http:\/\/www.lightorama.com\/help\/configuring_units.htm\"\u003ehttp:\/\/www.lightorama.com\/help\/configuring_units.htm\u003c\/a\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":515,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":65280},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\"}' data-sheets-root=\"1\"\u003eS5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur RGBPlus sequences contain effects for this star; our traditional and deluxe sequences do not. If you purchased any 'Traditional' or 'Deluxe' SD card, your card does NOT have effects for this star. You must have an RGBPlus layout SD card or individually downloaded sequence for this star to have effects (or you can create your own sequence.)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoro Star 18\" (50 Node)\u003c\/li\u003e\n\u003cli\u003e50 Ct Black Pixels (4\" spacing). LOR style end connector.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDangle Not Included. This pixel strand should connect to another pixel strand from your Mega Tree.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003ePixel Extension - Black (10ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting Materials to attach star topper to the top of the pixel tree \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Assembly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePixels are not pre-pushed. Assembly is to be completed by the customer. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe star should be oriented so that the two vertical attachment slats are straight up and down. When viewing the star from the back, \u003c\/span\u003e\u003cspan\u003ethe \"star\" for \"start\" on the pixel path should be in the \"valley\" at the bottom of the slats. From the back view, the pixel path will run counterclockwise. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter installing your pixels, install the two larger pieces of the coro clamp in from the front side of the star. The fit is tight so it will stay in place. Next, insert the two filler plates on the back side of the star above the bottom pixels and use 4 zipties (not included) to hold all four pieces of the coro clamp together. This will lock in the coro clamp to the star.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf using the star with a 16x25 Pixel Tree Kit (strands end at the BOTTOM due to a \"fold\"), connect the pixel strand of the star to Strand #8 of your pixel tree (the 8th strand that has been folded to create \"columns 15 and 16\" on your tree). The Unit ID in the preview editor should be 47 (the ID of the last port on the Pixie8 for the tree), and the starting circuit should be 151. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo use this start with an existing 16x25 Pixel tree, you must change your Pixie8's setting to allow 100 pixels per port instead of the default 50 pixels or else your star will not light. \u003ca href=\"http:\/\/www.lightorama.com\/help\/configuring_units.htm\"\u003ehttp:\/\/www.lightorama.com\/help\/configuring_units.htm\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eDO NOT use more than a 10 foot pixel extension if you are connecting the star to a strand of pixels on a Pixel Tree and not using a separate controller for the star.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur prop packages can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and \u003ca href=\"\/pages\/how-many-lights-can-i-connect\"\u003enetwork limits\u003c\/a\u003e have not been exceeded. \u003c\/p\u003e\n\u003ch6\u003eRGBPlus \/ 16x25 Tree\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003eIf using the star with a\u003cstrong\u003e 16x25 Pixel Tree Kit\u003c\/strong\u003e (strands end at the BASE) with our RGBPlus Sequences (first available October 2022), connect the pixel strand of the star to Strand #8 of your pixel tree. The Unit ID in the preview editor should be 47 (the ID of the last port on the Pixie8 for the tree), and the starting circuit should be 151.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eTo use this star with an existing 16x25 Pixel tree, you must change your Pixie8's setting to allow 100 pixels per port instead of the default 50 pixels or else your star will not light. \u003ca style=\"color: rgb(255, 42, 0);\" href=\"http:\/\/www.lightorama.com\/help\/configuring_units.htm\"\u003ehttp:\/\/www.lightorama.com\/help\/configuring_units.htm\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBoth the Pixel Tree and star topper should be on the \u003cstrong\u003eRegular network\u003c\/strong\u003e of your computer or \u003cstrong\u003eNet 1\u003c\/strong\u003e of your Mini, N2-G4 or N4-G4 Showtime Director.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eDO NOT use more than a 10 foot pixel extension if you are connecting the star to a strand of pixels from a Pixel Tree.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about using these props with our RGBPlus Sequences and altering networks\/Unit IDs by \u003ca href=\"\/pages\/sequence-layouts\" target=\"_blank\"\u003eclicking here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003eThe warranty applies to the pixels included in this package.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/warranties\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/TwoYearBannerNoUnlimited150x400_480x480.png?v=1651780891\" alt=\"Warranty\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Black","offer_id":45373858939125,"sku":"CP-StarTopper18|CoroStar18|Coro-Star-Clamp|12V-Bullet-4in-Black-50-LOR|Ext-Black-10ft-LOR-1","price":44.95,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":45373858971893,"sku":"CP-StarTopper18|CoroStar18|Coro-Star-Clamp|12V-Bullet-4in-Black-50-LOR|Ext-Black-10ft-LOR-2","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/16x50Star.png?v=1715883889"},{"product_id":"singing-halloween-pumpkins-4-character-bundle","title":"Singing RGB Halloween Pumpkins - 4 Character Bundle","description":"\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003e\u003cbig\u003e\u003cbig\u003e\u003cspan\u003eThe Singing Pumpkins - Jack, Gourdy, Max, Munchkin\u003c\/span\u003e\u003c\/big\u003e\u003c\/big\u003e\u003c\/p\u003e\n\u003cp\u003eThe standard package includes four singing tree characters with a Pixie8 controller, 16 sets of 50 black square pixels (LOR connectors), and 8 extensions (four 5ft and four 10ft). \u003c\/p\u003e\n\u003cp\u003ePixel pushing is completed by the customer following the path on the back of the Coro faces. This package may be purchased without a Pixie8 controller if you \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Singing_Face_Character_Instructions.pdf?v=1730747882\" rel=\"noopener\" target=\"_blank\"\u003ealready own a Pixie you can use\u003c\/a\u003e, such as from your Singing Tree package purchase.\u003c\/p\u003e\n\u003cp\u003eIf you do not use a Pixie controller included with this package, you must set the \"personalities\" of your Singing Pumpkins in your own Pixie using the Control Panel\u0026gt;Hardware Utility\u0026gt;Advanced Configuration. A Pumpkin personality takes up two ports, and can be configured in the dropdown fields.\u003c\/p\u003e\n\u003cp\u003eFrames are not included and must be built by the customer. Each character uses 190-200 smart pixels based on two 100 square pixel strings. Pixel spacing is 1-2″ depending on location.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eFRAMES NOT INCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca rel=\"noopener\" style=\"color: rgb(43, 0, 255);\" href=\"https:\/\/youtu.be\/9Ii0ns0xDk0\" target=\"_blank\"\u003eSee DIY Frame Build Option Here\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJack - Ports 1 \u0026amp; 2\u003c\/li\u003e\n\u003cli\u003eGourdy - Ports 3 \u0026amp; 4\u003c\/li\u003e\n\u003cli\u003eMax - Ports 5 \u0026amp; 6\u003c\/li\u003e\n\u003cli\u003eMunchkin - Ports 7 \u0026amp; 8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eDimensions (for optional frame building): 42\"h by 39\"w\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/ReadMeFirst-Singing_PUMPKIN_Quick_Set_Up_Guide.pdf?v=1691777069\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eRead more about set up instructions for your face by clicking here.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis singing face character bundle standard package is controlled by an outdoor rated, weatherproof Pixie8 controller with built-in power supply. Just connect the Pixie8 to your existing standard Light-O-Rama data network with a Cat5, tweak your musical sequences to add in these talking\/singing characters (\u003ca href=\"https:\/\/store.lightorama.com\/collections\/sequences-singing-faces\"\u003eor buy our pre-made sequences\u003c\/a\u003e) and you’re good to go. \u003c\/p\u003e\n\u003cp\u003eThe Assembled Pixie8 controller includes the controller board and power supply wired and mounted in a weather-proof, ventilated and UL listed enclosure. \u003cspan data-teams=\"true\"\u003eThe power supply is UL listed: MeanWell LRS-350-12 - 120\/240V input (User Selectable) - 12V - 29A output - with extended temperature operating range.\u003c\/span\u003e This is a 12 Volt controller system compatible with 12V RGB smart pixel strands and devices. Dumb RGB devices or standard LED \/ Incandescent lights cannot be plugged into the ports of this controller.\u003c\/p\u003e\n\u003cp\u003eThese characters can be controlled using a standard PC set up (with a USB485 adapter) or with any of our \u003ca href=\"https:\/\/store.lightorama.com\/collections\/showtime-directors-and-sd-cards\"\u003eShowtime Directors.\u003c\/a\u003e If you are using these Singing Faces with any Deluxe, RGBPlus, or Singing Face Standalone sequences purchased from our sequence store, they should be connected to your “Regular” computer network or “Net 1” Showtime Director network.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cstrong\u003eSoftware is not included.\u003c\/strong\u003e\u003c\/span\u003e The \u003cstrong\u003eAdvanced Version\u003c\/strong\u003e of the Light-O-Rama Software Suite v5.3.0+ is required to use \u003ca href=\"https:\/\/store.lightorama.com\/collections\/sequences-singing-faces\"\u003eStandalone singing face sequences from our store.\u003c\/a\u003e The \u003cstrong\u003ePro Version\u003c\/strong\u003e of the Light-O-Rama Software Suite is required to use other props in RGBPlus sequences.\u003c\/p\u003e\n\u003ch6\u003eMouth Movements\u003c\/h6\u003e\n\u003cp\u003eFour different singing pumpkin characters are available for you to use altogether as a set or mix and match as you see fit. (Jack, Gourdy, Max and Munchkin).\u003c\/p\u003e\n\u003cp\u003eEach singing face is on a sheet of outdoor rated, UV stabilized, black plastic that is 42 inches tall by 39 inches wide. A singing character has fourteen or fifteen circuits of RGB control: body outline, stem, two eye movements, ten mouth movements, and nose\/eyebrows depending on the pumpkin. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003echaracter outline\u003c\/li\u003e\n\u003cli\u003estem on top\u003c\/li\u003e\n\u003cli\u003eeyes closed\u003c\/li\u003e\n\u003cli\u003eeyes open\u003c\/li\u003e\n\u003cli\u003emouth closed\u003c\/li\u003e\n\u003cli\u003emouth E (half open)\u003c\/li\u003e\n\u003cli\u003emouth A or I (full open)\u003c\/li\u003e\n\u003cli\u003emouth O or U\u003c\/li\u003e\n\u003cli\u003emouth Ah\u003c\/li\u003e\n\u003cli\u003emouth M, B or P\u003c\/li\u003e\n\u003cli\u003emouth F or V\u003c\/li\u003e\n\u003cli\u003emouth L\u003c\/li\u003e\n\u003cli\u003emouth W or Q\u003c\/li\u003e\n\u003cli\u003emouth etc.\u003c\/li\u003e\n\u003cli\u003enose\/eyebrows (different per pumpkin)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRGB pixels are used in our singing faces so a section can be any color, making it useful when expressing moods during a song.  The lips might change colors or the eyes could flash from orange to purple when appropriate.\u003c\/p\u003e\n\u003cp\u003eWhen sent with a singing face, our Pixie8 controller is configured to make each of the above sections act like dumb RGB pixels. This way, adding a singing face to your network only takes up “14 dumb pixels” instead of the full “200 smart pixels” actually used to create this face. This makes sequencing easier for you and saves you network space at the same time. You do not need to do anything special to your Pixie8 controller for this to happen – it has already been done for you at our warehouse. \u003cstrong\u003eDo NOT reset your controller without instruction from the Light-O-Rama Help Desk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePurchases outside the United States and Canada are assembled with an internationally approved and \u003cspan data-teams=\"true\"\u003eUL listed: MeanWell RSP-320-12 - 120\/240V input - 12V - 26.7A output - with Power Factor Correction and extended temperature operating range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003eModes\u003c\/h6\u003e\n\u003ch4\u003e\u003cstrong\u003ePersonality Mode - Default\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSinging Face controllers are shipped already configured for personality mode. Using the Hardware Utility, two ports of the Pixie controller have been assigned to the respective character. It is important to connect the ports to the right character as pixel placement is different for each character - they are not interchangeable.\u003c\/p\u003e\n\u003cp\u003eFirmware settings allow personality mode to treat a singing character as 14 pixels on your network instead of the full 200 pixel nodes used. (14 sections - 10 Mouth, 2 Eyes, Outline, Topper)\u003c\/p\u003e\n\u003cp\u003eThe personality of a singing face can be changed or removed by using a computer with Light-O-Rama software installed. Scan for the controller in the Hardware Utility, choose Config for your Pixie, and open the Advanced settings to find the dropdown.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCustom Mode\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eA custom model of V2 singing characters can be used if personality mode is disabled in the Hardware Utility. A custom model will use the full 200 pixels of data on your network instead of 14.\u003c\/p\u003e\n\u003cp\u003eUse a custom model to use your Pixie in Double Unit ID mode (firmware v1.11+ required), use an Aurora Core or Aurora Edge, or to use Motion Effects on any section of your character instead of solid colors. Custom models will NOT work automatically with Light-O-Rama store sequences (which use personality mode configured effects), and will not transfer with tags. Copy and paste is required to use effects from Store Sequences.\u003c\/p\u003e\n\u003cp\u003eClick the character name below to download the .lpeprop file to import into your preview. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_EldenV2-Custom_Shape.lpeprop?v=1777487582\" rel=\"noopener\" target=\"_blank\"\u003eElden Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_FelixV2-Custom_Shape.lpeprop?v=1777487581\" rel=\"noopener\" target=\"_blank\"\u003eFelix Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_RalphieV2-Custom_Shape.lpeprop?v=1777487582\" rel=\"noopener\" target=\"_blank\"\u003eRalphie Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Tree_ZuzuV2-Custom_Shape.lpeprop?v=1777487581\" rel=\"noopener\" target=\"_blank\"\u003eZuzu Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_JackV2-Custom_Shape.lpeprop?v=1777487581\" rel=\"noopener\" target=\"_blank\"\u003eJack Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_GourdyV2-Custom_Shape.lpeprop?v=1777487580\" rel=\"noopener\" target=\"_blank\"\u003eGourdy Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_MaxV2-Custom_Shape.lpeprop?v=1777487580\" rel=\"noopener\" target=\"_blank\"\u003eMax Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/LOR_Pumpkin_MunchkinV2-Custom_Shape.lpeprop?v=1777487582\" rel=\"noopener\" target=\"_blank\"\u003eMunchkin Custom Prop\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/warranties\" title=\"Light-O-Rama Warranty\"\u003eClick for more info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/warranties\" title=\"Light-O-Rama Warranty\"\u003e\u003cimg style=\"float: left;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/30DayMoneyBack-RevA-1000x1000_480x480.png?\" alt=\"\" width=\"200\" height=\"200\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/OneYearWarranty-RevB-1000x1000_480x480.png\" style=\"float: left;\" width=\"200\" height=\"200\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Light-O-Rama","offers":[{"title":"Pixie8 (LOR Black Dangles) \/ Customer Pushes Pixels \/ None","offer_id":45670339641589,"sku":"SingingPumpkin-Jack|SingingPumpkin-Gourdy|SingingPumpkin-Max|SingingPumpkin-Munchkin|Pixie8-12V|Dangle-Black-LOR|12V-Square-Black-50-LOR|Ext-Black-5ft-LOR|Ext-Black-10ft-LOR|CustomerAssemble","price":899.95,"currency_code":"USD","in_stock":true},{"title":"Pixie8 (LOR Black Dangles) \/ Customer Pushes Pixels \/ 50ft","offer_id":47206079791349,"sku":"SingingPumpkin-Jack|SingingPumpkin-Gourdy|SingingPumpkin-Max|SingingPumpkin-Munchkin|Pixie8-12V|Dangle-Black-LOR|12V-Square-Black-50-LOR|Ext-Black-5ft-LOR|Ext-Black-10ft-LOR|Cat-5e50ft|CustomerAssemble","price":914.95,"currency_code":"USD","in_stock":true},{"title":"Purchase Controller Separately \/ Customer Pushes Pixels \/ None","offer_id":45778778161397,"sku":"SingingPumpkin-Jack|SingingPumpkin-Gourdy|SingingPumpkin-Max|SingingPumpkin-Munchkin|12V-Square-Black-50-LOR|Ext-Black-5ft-LOR|Ext-Black-10ft-LOR|CustomerAssemble","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/2969\/1125\/files\/Pumpkin4.png?v=1711565887"}],"url":"https:\/\/store.lightorama.com\/collections\/prop-expansion-packs.oembed","provider":"Light-O-Rama","version":"1.0","type":"link"}