Our Prop Packages include the Coro and Pixels you need to easily add smart pixel props into to your display, and use whichever Pixie controller best suits your needs (sold separately). These props can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer/showtime director if it is the only Unit in the show. The props in this package must be assigned to specific Unit IDs in order to work with our RGBPlus sequences.
S5.6.8 or higher is recommended for easiest use; a Pro license level is required to use Pixel Motion Effects.
Included in this Package:
4 Coro Spinners - 100 Nodes Each. "Pixel Path" for pixel pushing included on the back of each prop.
Approx. 22" in diameter
10mm White Coro with Red Stripes
8 Strands of White Bullet Pixels - 50 Ct (4" spacing). Two strands of 50 should be connected together per prop.
Dangles not included. The controller you use needsdangles installed.
4 Pixel Extensions - White (5ft, 10ft, 15ft, or 25ft)
Mounting material for home attachment
Metal stakes or other ground mounting material
Our Prop Packages can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and network limits have not been exceeded. If you're looking for a package with the controller included, consider purchasing a CPC Kit (Coro, Pixels, Controller) instead.
If you want more than 4 Spinners but still want to use our RGB Plus Sequences, just put multiples of this kit ito your cart and make sure each controller uses the SAME Unit IDs when you set up your display. Read more about our sequences in the RGBPlus Sequence tab.
Pixels are not pre-pushed. Assembly is to be completed by the customer. When viewing the spinner from the back, the spoke with the Pixel Path "star" (for "start") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the "square" (for "stop").
To use this Prop Package with our RGBPlus Sequences (Available October 2022), the Pixie controller you use must be connected to the AuxA network on your computer or Net 2 of your N2-G4 or N4-G4 Showtime Director. You must be using 5.6.8 or higher in order to use RGBPlus Sequences with a computer.
Spinners should be arranged with spinner 1 on the left if the spinners are in a horizontal stack, or spinner 1 should be on the top of a vertical stack. When viewing the spinner from the back, the spoke with the Pixel Path "star" (for "start") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the "square" (for "stop").
The props in this package must be connected to Unit IDs 1D, 1E, 1F and 20, both physically on your Pixie controller and in your S5 Preview. Learn more about setting the Unit ID of your Pixie controller using DIP switches by clicking here.
Learn more about using these props with our RGBPlus Sequences and altering networks/Unit IDs by clicking here.
The warranty applies to the pixels included in this package.