CPC Package - Pixel Tree (32x50)

SKU: CPC-MegaTree32x50-8|Pixie16-12V|12V-Bullet-Black-50-4in-LOR|SpoolBlack175-2|CAT-5E25FT|Ext-Black-5ft-LOR


Coro-Pixels-Controller (CPC) Package for a 16x32 Mega Tree (Frame not included). Use this package in your own sequences on any network, or with our default RGBPlus Sequence Layout on the Aux C Network/Network 4.

Square pixels are easier to push into strips and have flat backs. Bullets are a more economical option to use with strips, but are slightly more difficult to insert.

$1,289.95 $1,352.98 Save $63.03

Shipping calculated at checkout

Square 4" LOR - Black
Bullet 4" LOR - Black
8ft (2" spacing)
12ft (3" spacing)
16ft (4" spacing)
5ft(x16)
Purchase Extensions Separately
Current processing/packing time for an order containing this item is 4-7 business days. The item will ship using your chosen shipping method after it is processed.

For non-modified use with RGBPlus sequences, the controller in this package must be connected to Network Aux C/Network 4. Each network in your show requires a USB485-HS Adapter (computer show) or an available port of a Showtime Director.

Our "CPC" packages include the "Coro, Pixels, and Controller" you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer/showtime director if it is the only Unit in the show.

S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.

The Assembled Pixie16 controller includes the controller board and power supply wired and mounted in a weather-proof, ventilated and UL listed enclosure. The power supply is UL listed: MeanWell RSP-500-12 - 120/240V input - 12V - 41.7A output - with Power Factor Correction and extend temperature operating range. This is a 12 Volt controller system compatible with 12V RGB smart pixel strands and devices. Dumb RGB devices or standard LED / Incandescent lights cannot be plugged into the ports of this controller.

Spacing for Tree Height:

  • For an 8 Foot Tall Tree, space pixels 2" apart (every other mounting strip hole; gap of 1). 
  • For a 12 Foot Tall Tree, space pixels 3" apart (every third mounting strip hole; gap of 2)
  • For a 16 Foot Tall Tree, space pixels 4" apart (every fourth mounting strip hole; gap of 3). 

Calculate the needed radius/diameter of your tree frame by clicking here.

Example of 2" spacing for 8' tall tree

 

Included in this Package:

  • 32 Strands of 50 Ct Pixels (Select one from below). LOR style connectors. 4" lead wire.
  • Pixie16 Controller - Assembled -12V - With LOR Dangles Included
  • Pixel Mounting Strip Rolls with holes spaced at 1" intervals.
    • 2" spacing tree = 350' of Mounting Strips
    • 3" spacing tree = 425' of Mounting Strips
    • 4" spacing tree = 600' of Mounting Strips

Additions:

  • 16 Pixel Extensions - Black (5ft)
  • Cat5 Cable (25ft)

Not Included:

  • Star Topper Kit (Buy Here)
    • Important! This tree is designed by default with FOLDED strands that end at the BASE of the tree. 
  • Tree Frame (Buy Here)
  • Tree (Metal) Topper
  • Tree Base
  • Center Pole or Pipes
  • Pole for Star Attachment
  • Guy Wires or Cables
  • Assembly Hardware (Fasteners, Screws, Washers, Nuts, etc.)
  • Ground Stakes

Frame construction is the responsibility of the purchaser. We do not provide instructions for the creation of DIY pixel tree frames for this package.

 

Our CPC packages can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and network limits have not been exceeded. 

If you want duplicates of the props in this package but still want to use our RGB Plus Sequences, just put multiples of this kit into your cart and make sure each Pixie controller uses the SAME Unit IDs when you set up your display. Read more about our sequences in the RGBPlus Sequence tab. 

Package Assembly

Pixels are not pre-pushed. Assembly is to be completed by the customer. 

The first pixel of each strand of 100 (two 50s connected) should begin at the bottom of every odd row and continue upwards towards the top. The string should then fold and continue downward down the adjacent even numbered strand and end at the base of the tree. When viewing the tree as the audience, the first strand should be on the left of the tree and the 32nd strand should be on the right. This kit can be used to create a 180 or 360 degree Mega Tree.

Example of strands folded up and over:

What can your display look like with our CPC Packages? Take a look!