CPC Package - 4 Lollipops (Pixel Bright)

Overview

Our "CPC" packages include the "Coro, Pixels, and Controller" you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. One Cat5e or Cat6 cable is required per controller to connect it into a multi-controller network, or directly to a computer, showtime director, or Touch Player if it is the only controller in the show.

Our CPC packages can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and network limits have not been exceeded. To incorporate duplicates of these props easily into your display, add a second package to your cart and use the same Unit ID / Universe on your controllers.

To customize the controller and props used (or to add more props to this controller), visit our collection of Prop Packages so you can use the Pixie controller that best suits your needs. Learn more about installing sequences or modifying default networks here.

S6.2.0 or higher is recommended for easiest use for personal sequence creation; buffer rows were introduced in S6.5.0 for more advanced effect options.

A free Basic license can control up to 680 pixels. A Pro license unlocks full pixel and traditional LED control.

Prop Assembly

Pixels are not pre-pushed. Assembly is to be completed by the customer. A Quick Guide of specific instructions is included with each CPC package. In general, props should be arranged left to right or top to bottom when viewed as the audience.

When viewing a 10mm coro prop from the back, locate the silver "star" in the pixel path as the "start" of pushing your pixels. The side of the pixels with the male end (the 3 prongs) is the starting side of the strand. Follow the silver pixel path until you reach the "square" for "stop." For single line props (arches, rooflines, windows), the pixels should be pushed right to left when viewing the prop from the back. (Left to right viewing as the audience). The Quick Guide instructions will tell you if your prop uses 25, 50, 100, or 150 pixels per port of your controller.

Mount the props to your home or in your yard using standard ground stakes, zip ties, PVC or other mounting material of your choice.

Using CPC Packages with RGBPlus Sequences either requires version S5.6.8+ or S6.2.0+ for use. The required version is listed per sequence or SD card purchase page. CPC Packages are NOT compatible with Traditional Layout Sequences. Learn more about the RGBPlus layout in detail by clicking here.

Effects included in RGBPlus Christmas sequences:

• Four 16 Channel AC Controllers
• 4 Channels for Strobes (AC)
• Eight 10W Floods
• Eight 50W Floods
• RGB 4 Singing LOR Trees
• RGB Pixel Tree 16x25
• RGB Pixel Tree 16x50
• RGB Pixel Tree 32x50
• RGB Star Topper 18"
• RGB Star Topper 32"
• RGB 8 Mini Trees with Stars
• RGB 4 Snowflakes
• RGB 4 Spinners
• RGB 4 Candy Canes
• RGB 8 Mini Arches
• RGB 40 Pixel Stakes
• RGB 4 Rooflines
• RGB 4 Frames
• RGB 20x40 Matrix

Effects included in RGBPlus Halloween sequences:

• Four 16 Channel AC Controllers
• 4 Channels for Strobes (AC)
• Eight 10W Floods
• Eight 50W Floods
• RGB 4 Singing LOR Pumpkins
• RGB Pixel Tree 16x25
• RGB Pixel Tree 16x50
• RGB Pixel Tree 32x50
• RGB Star Topper 18"
• RGB Star Topper 32"
• RGB 8 RIP Tombstones
• RGB 4 Bats
• RGB 4 Spiders
• RGB 4 Ghosts
• RGB 8 Mini Arches
• RGB 40 Pixel Stakes
• RGB 4 Rooflines
• RGB 4 Frames
• RGB 20x40 Matrix

Using CPC Packages with PixelBright Sequences either version S6.5.0+ for use. CPC Packages are NOT compatible with Traditional Layout Sequences. Learn more about the Pixel Bright layout in detail by clicking here.

The Pixel Bright layout spans 6 ELOR networks. To use the Pixel Bright default layout (rather than making your own custom preview, recommended), using a a Pixielink (or Aurora Core controllers instead of Pixies) is strongly advised.

Effects included in Pixel Bright Sequences:

• Four 16 Channel AC Controllers
• 4 Channels for Strobes (AC)
• Eight 10W Floods
• Eight 50W Floods
• RGB 4 Singing LOR Trees
• RGB Pixel Tree 16x25
• RGB Pixel Tree 16x50
• RGB Pixel Tree 32x50
• RGB Star Topper 18"
• RGB Star Topper 32"
• RGB 8 Mini Trees with Stars
• RGB 4 Snowflakes
• RGB 4 Spinners
• RGB 8 Candy Canes
• RGB 8 Mini Arches
• RGB 40 Pixel Stakes
• RGB 4 Rooflines
• RGB 4 Frames
• RGB 20x40 Matrix
• RGB 32x50 Singing Character Matrix
• RGB 40x80 Matrix
• RGB 8 Presents
• RGB 4 Lollipops
• RGB 8 Wrapped Candies
• RGB 8 Large Arches
• RGB 8 Ornaments
• RGB 8 Verticals/Columns
• RGB 2 Crystal Snowflakes
• RGB 1 HD Diamond Mandala
• RGB 4 Singing LOR Bulbs

The Assembled Pixie controller includes the controller board and power supply wired and mounted in a weather-proof, ventilated and UL listed enclosure. This is a 12 Volt controller system compatible with 12V RGB smart pixel strands and devices. Dumb RGB devices or standard LED / Incandescent lights cannot be plugged into the ports of this controller.

Pixie power supplies are UL Listed:

• Pixie4 = MeanWell LRS-150-12 - 120/240V input (User Selectable) - 12V - 12.5A output - with extended temperature operating range.
• Pixie8 = MeanWell LRS-350-12 - 120/240V input (User Selectable) - 12V - 29A output - with extended temperature operating range.
• Pixie16 / Aurora Core = MeanWell LRS-600-12 - 120/240V input (User Selectable) - 12V - 50A output - with extended temperature operating range.

A Quick Guide will arrive with your CPC Package purchase. View the expanded manual for the Pixie Controller by clicking here.

Pixie4 Dimensions:

Enclosure Dimensions Outer = 11.85" x 8.5" x 4.25"
Enclosure Dimensions Inner = 9" x 6.15" x 3.5"

Dangle length (if included): 10.5" to 16" each (4 Total)
Power Cord: 57 1/2"

Pixie8 Dimensions:

Enclosure Dimensions Outer = 13.75" x 11.75" x 5.5"
Enclosure Dimensions Inner = 10.25" x 8.75" x 4.5"

Dangle length (if included): 11" to 17" each (8 Total)
Power Cord: 68 1/2"

Pixie16 Dimensions:

Enclosure Dimensions Outer = 15.25" x 12.5" x 6"
Enclosure Dimensions Inner = 14" x 10.25" x 5.25"

Dangle length beyond enclosure (if included):varies 5" to 11"
Power Cord: 66"

Purchases outside the United States and Canada are assembled with an internationally approved and UL listed MeanWell RSP-150-12, RSP-320-12, or RSP-500-12V - 120/240V input - 12V - 12.5A output - with Power Factor Correction and extended temperature operating range.

The 2 Year warranty applies to the controller board included in this package. All other components have a standard 1 Year warranty.

Products in this package are covered by the 30 Day Money Back Guarantee.