Included in this Package:
- One Singing Bulb Character. "Pixel Path" for pixel pushing included on the back of each prop.
- 45.5” T x 21.25” W
- 10mm Colored Coro
- 4 Strands of Black Bullet Pixels - 50 Ct (4" spacing). LOR end connectors.
- Pixie2 Controller - Assembled -12V - With Black LOR Dangles Included
- Pixel Extensions (x2) - 5ft Black
Not Included
- Mounting or other stabilization material.
Customers will assemble the lights into the coro after purchase, following the printed diagram on the back of the face with supplemental printed instructions.
For use with Pixel Bright or indicated Singing Face Standalone Sequences, connect the Pixie2 to ELOR Network 1 ("Regular") with Cat5e/Cat6. In the default layout, Singing Bulbs are used at Unit IDs 38, 3A, 3C, and 3E.
If you already own a Singing Face and would like to purchase this Bulb without the Pixie2 controller, please contact our helpdesk for assistance with a custom order. Controller changes are required.
Note: Software and sequences are not included with this purchase.
Four different color bulbs characters are available for you to use altogether as a set or mix and match as you see fit. (Green, Blue, Yellow, Red)
Each singing face is created from colored 10mm coro. Singing bulbs have fourteen circuits of RGB control: bulb outline, socket, two eye movements, and ten mouth movements.
- character outline
- bulb socket
- eyes closed
- eyes open
- mouth closed
- mouth E (half open)
- mouth A or I (full open)
- mouth O or U
- mouth Ah
- mouth M, B or P
- mouth F or V
- mouth L
- mouth W or Q
- mouth etc.
- nose/eyebrows (different per pumpkin)
RGB pixels are used in our singing faces so a section can be any color, making it useful when expressing moods during a song.
When sent with a singing face, our Pixie2 controllers are configured in "personality mode" to make each of the above sections act like dumb RGB pixels. This way, adding a singing face to your network only takes up “14 dumb pixels” instead of the full “200 smart pixels” actually used to create this face. This makes sequencing easier for you and saves you network space at the same time. You do not need to do anything special to your controller for this to happen – it has already been done for you at our warehouse. Do NOT reset your controller without instruction from the Light-O-Rama Help Desk.
Personality Mode - Default
Singing Face controllers are shipped already configured for personality mode. Using the Hardware Utility, two ports of the Pixie controller have been assigned to the respective character. It is important to connect the ports to the right character as pixel placement is different for each character - they are not interchangeable.
Firmware settings allow personality mode to treat a singing character as 14 pixels on your network instead of the full 200 pixel nodes used. (14 sections - 10 Mouth, 2 Eyes, Outline, Topper)
The personality of a singing face can be changed or removed by using a computer with Light-O-Rama software installed. Scan for the controller in the Hardware Utility, choose Config for your Pixie, and open the Advanced settings to find the dropdown.
Custom Mode
A custom model of V2 singing characters can be used if personality mode is disabled in the Hardware Utility. A custom model will use the full 200 pixels of data on your network instead of 14.
Use a custom model to use your Pixie in Double Unit ID mode (firmware v1.11+ required), use an Aurora Core or Aurora Edge, or to use Motion Effects on any section of your character instead of solid colors. Custom models will NOT work automatically with Light-O-Rama store sequences (which use personality mode configured effects), and will not transfer with tags. Copy and paste is required to use effects from Store Sequences.
Click the character name below to download the .lpeprop file to import into your preview.
