CPC MegaPack - Snowflakes and Spinners

SKU: CPC-MPFlakeSpinner|CoroFlake|CoroSpinner|Pixie8-12V|12V-Bullet-4in-White-50-LOR|Dangle-White-LOR


Coro-Pixels-Controller (CPC) MegaPack with 4 Snowflakes (48 Node) and 4 Spinners (100 Node). Use this package in your own sequences on any network, or with our default RGBPlus Sequence Layout on Aux A/Network 2.

$919.85 $950.03 Save $30.18

Shipping calculated at checkout

Purchase Extensions Separately
15ft(x4) + 25ft(x4)
None
50ft
Current processing/packing time for an order containing this item is 4-7 business days. The item will ship using your chosen shipping method after it is processed.

For non-modified use with RGBPlus sequences, the controller in this package must be connected to Network Aux A/Network 2. Each network in your show requires a USB485-HS Adapter (computer show) or an available port of a Showtime Director.

Our "CPC" packages include the "Coro, Pixels, and Controller" you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer/showtime director if it is the only Unit in the show.

S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.

The Assembled Pixie8 controller includes the controller board and power supply wired and mounted in a weather-proof, ventilated and UL listed enclosure. The power supply is UL listed: MeanWell RSP-320-12 - 120/240V input - 12V - 26.7A output - with Power Factor Correction and extend temperature operating range. This is a 12 Volt controller system compatible with 12V RGB smart pixel strands and devices. Dumb RGB devices or standard LED / Incandescent lights cannot be plugged into the ports of this controller.

Included in this Package:

  • 4 Coro Snowflakes (2 styles - 2 of each) - 48 Nodes Each. "Pixel Path" for pixel pushing included on the back of each prop.
    • Approx. 24" in diameter
    • 10mm White Coro
  • 4 Coro Spinners - 100 Nodes Each. "Pixel Path" for pixel pushing included on the back of each prop.
    • Approx. 22" in diameter
    • 10mm White Coro with Red Stripes
  • 12 Strands of White Bullet Pixels - 50 Ct (4" spacing). LOR end connectors.
    • 4 Strands of 50 for the Snowflakes
    • 8 Strands of 50 for the Spinners (to create 4 Strands of 100)
  • Pixie8 Controller - Assembled -12V - With LOR Dangles Included

Optional Additions:

  • 8 Pixel Extensions - White (15ft x 4 & 25ft x 4)
  • Cat5 Cable (50ft)

Not Included:

  • Mounting material for home attachment
  • Metal stakes or other ground mounting material

Our CPC packages can be used in a display with custom sequencing as long as the controller's Unit IDs do not conflict with any other Unit ID assignments on the network, and network limits have not been exceeded. To incorporate more than 4 snowflakes and 4 spinners into your custom sequenced display, visit our collection of Prop Packages so you can use the Pixie controller that best suits your needs.

If you want more than 4 Snowflakes and 4 Spinners but still want to use our RGB Plus Sequences, just put multiples of this kit into your cart and make sure each controller uses the SAME Unit IDs when you set up your display. Read more about our sequences in the RGBPlus Sequence tab. 

Package Assembly

Pixels are not pre-pushed. Assembly is to be completed by the customer. 

When viewing the snowflake from the back, the arm with the Pixel Path "star" (for "start") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the "square" (for "stop").

When viewing the spinner from the back, the spoke with the Pixel Path "star" (for "start") should be pointing straight down, with the pixel path continuing in a clockwise fashion until it reaches the "square" (for "stop").

Mount the props to your home or in your yard using standard ground stakes, zip ties, PVC or other mounting material of your choice.

What can your display look like with our CPC Packages? Take a look!